Features Redesigned high and forward center of gravity location offers more consistent, better-feeling shots with more control Progressive CG is lower in the low lofts and higher in the high lofts to properly align center of gravity with impact location for greater control and feel Longer hosels and high-density tungsten weight low in the toe help fine-tune CG location and boost forgiveness Six Tour-proven sole grinds are designed to fit every type of swing, turf condition, and shot-making style 100% inspected spin milled wedges are cut to even tighter tolerances, resulting in even more spin Proprietary heat treatment results in longer-lasting spin throughout the life of the wedge Stock shaft: True Temper Dynamic Gold Six Tour-Proven Sole Grinds Bounce and sole grinds allow golfers to be fit into the best performance for their swing type and course conditions. SM8 wedges have six options. The F Grind is an all-purpose grind with a traditional full sole, designed to be used primarily on full swings and square face shots. The S Grind is designed for stability on full shots, best used for square-faced shots with a touch more versatility, based on feedback from Tour pro Steve Stricker. The M Grind, Bob Vokey's favorite, is made for players who like to rotate the face open and shut for serious versatility around the greens. The D Grind is the "player's high bounce wedge". It features the same crescent shape of the M with a higher effective bounce for golfers with a steep angle of attack. The K Grind is the highest bounce grind in the lineup, designed to be the most forgiving for play out of bunkers. The L Grind has a narrow crescent shape for maximum versatility around the greens, but it's also the least forgiving. Redesigned high and forward center of gravity location offers more consistent, better-feeling shots with more control Progressive CG is lower in the low lofts and higher in the high lofts to properly align center of gravity with impact location for greater control and feel Longer hosels and high-density tungsten weight low in the toe help fine-tune CG location and boost forgiveness Six Tour-proven sole grinds are designed to fit every type of swing, turf condition, and shot-making style 100% inspected spin milled wedges are cut to even tighter tolerances, resulting in even more spin Proprietary heat treatment results in longer-lasting spin throughout the life of the wedge Stock shaft: True Temper Dynamic Gold Steel Progressive Center Of Gravity This concept, pioneered by Titleist and Vokey, aligns the center of gravity with the impact position specific to each loft for precise distance and trajectory control. In the SM8 wedges, the center of gravity is more forward than ever before for more consistent, better-feeling shots. 100% Inspected Spin Milled Grooves Every groove on every wedge is inspected at Titleist's facility. This guarantees each wedge is made to their strict tolerances. Grooves are cut even sharper providing even more rpm. Each wedge is also specially heat treated to provide longer-lasting spin for the life of the club. Titleist Vokey SM8 Wedge Sole Grind Guide Grind Description Swing Type Turf Conditions L Grind Enhanced heel, toe and trailing edge for maximum versatility Shallow/Sweeper Firm M Grind Heel, toe and trailing edge grind for versatility around greens Shallow/Sweeper | Neutral Firm | Medium S Grind Trailing edge and heel grind for stability on full shots Neutral | Steep/Digger Medium | Soft F Grind Traditional full sole with medium to high bounce, an all-purpose grind Shallow/Sweeper | Neutral | Steep/Digger Firm | Medium | Soft K Grind Wide sole ideal for bunker play, camber enhanced for green-side versatility Neutral | Steep/Digger Medium | Soft D Grind Crescent shape like the M with higher effective bounce Steep/Digger Medium | Soft Titleist SM8 Wedges Loft Length Lie Grind Bounce Swing Weight 46° 35.75" 64° F Grind 10° D3 48° 35.75" 64° F Grind 10° D3 50° 35.5" 64° F Grind 8° D3 50° 35.5" 64° F Grind 12° D3 52° 35.5" 64° F Grind 8° D3 52° 35.5" 64° F Grind 12° D3 54° 35.25" 64° S Grind 10° D5 54° 35.25" 64° D Grind 12° D5 54° 35.25" 64° F Grind 14° D5 56° 35.25" 64° M Grind 8° D5 56° 35.25" 64° S Grind 10° D5 56° 35.25" 64° D Grind 12° D5 56° 35.25" 64° F Grind 14° D5 58° 35" 64° M Grind 8° D5 58° 35" 64° S Grind 10° D5 58° 35" 64° D Grind 12° D5 58° 35" 64° K Grind 14° D5 60° 35" 64° L Grind 4° D5 60° 35" 64° M Grind 8° D5 60° 35" 64° S Grind 10° D5 60° 35" 64° D Grind 12° D5 60° 35" 64° K Grind 14° D5 62° 35" 64° M Grind 8° D5

New UltiZip Grooves help maximize the ZipCore's performance and consistency.  The grooves are sharper to cut through grass more efficiently.  They're deeper, which helps channel debris for better contact.  Finally, the grooves are more tightly packed, leading to increased edge contact and greater consistency.   Three grinds are available in the RTX ZipCore:  The Mid Sole has a v-shaped sole with trailing edge relief.  This grind is perfect for all-around wedge play, players with a neutral to steep attack angle, and medium or soft conditions. The Low Sole is a c-shaped grind featuring relief on the heel, toe and trailing edge for superior versatility.  The Low Sole is perfect for finesse and open faced shops, a neutral to shallow attack angle, and medium or firm conditions. The Full Sole is a classic, stable design, with extra bounce as you open the face.  This grind is perfect for bunker and rough shots, a neutral to steep attack angle, and medium or soft conditions.  Cleveland elected to use both the True Temper Dynamic Gold Spinner Tour Issue and KBS Tour-V shafts in the ZipCore, and for good reason.  The Spinner provides all the characteristics of a tour issue wedge shaft, but is built to help generate extra spin and tour-level stopping power.  True Temper designed the Spinner to have a similar profile to the Dynamic Gold S200, but tuned it for wedge play.  The tested and tour-proven KBS Tour-V produces a lower-mid trajectory, mid ball spin and an incredibly tight shot dispersion. Features: Low-density ZipCore design shifts the center of gravity, raises MOI, adds spin, enhances control and boosts consistency UltiZip grooves are sharper, deeper and narrower.  They bite harder, channel more debris, and increase groove contact Measured, timed blast of heat increases wedge durability 3 Grinds available: Low Sole, Mid Sole, and Full Sole Stock Shaft: True Temper Dynamic Gold Spinner Tour Issue (Wedge Flex, 128 Grams) • KBS Tour-V 130 Stock Grip: Due to grip supply issues across the country, the grip may very, but will be standard size

Wilson® Staff Model wedges deliver short-game confidence and long-term reliability. The soft-forged carbon steel head and precision-milled face are just two of the game-enhancing features that our pro players said they wanted in a wedge. One swing, and you’ll understand why. Features: 8620 Carbon Steel provides a soft touch and incredible feel around the greens.​ Machine-engraved score lines in the precision- milled face feature a higher density pattern for more consistent contact with the ball. The result is maximum spin and control on every shot.​ The Staff Model wedges have been designed alongside our world-class tour players who provide direct feedback on design and performance. The end result for players at every level is confidence in their short game. Specifications: Grip: Golf Pride Tour Velvet Shaft Manufacturer TT Dynamic Gold 120 Shaft Material: Steel

Cobra's KING MIM Wedge is the first to feature a fully metal injection molded (MIM) head construction. A process utilized to create highly intricate shapes, MIM Technology delivers precision shaping and thickness controls to promote truly exceptional feel and performance in a specialty wedge.  What is Metal Injection Molding? Precise Process for the Best Performance MIM is a highly precise process used to create intricate shapes that casting and forging processes don't allow. Perfect Shaping for Pure Shots MIM produces 50% tighter shape and weight tolerances compared to cast wedges. A First of its Kind Cobra is the first company to use this process to manufacture an entire golf club head. Hotter and Forging During the sintering process, the head is heated to a hotter temperature than forgings and closer to the melting point. A higher temperature is key to creating a uniform grain structure that enhances feel. Smoother Grain Flow Comparing the grain structures of cast and forged metals, MIM consistently produces smaller and more evenly-spaced voids (holes) in the metal, resulting in softer feel. CNC Milled Face Each wedge face is precision milled to deliver exact specifications for maximum performance. A circular milling pattern optimizes roughness, and creates sharper groove edges to maximize spin across the face. Progressive Grooves Distinct groove shapes feature narrower, deeper grooves in the low lofts (50°-54°), and wider, shallower grooves in the higher lofts (56°-60°) to optimize spin on every shot. 3 Grind Options The "versatile" grind features toe, heel and trailing edge relief making it a great option for a variety of turf conditions and shot types. The “classic” grind features progressive sole width from heel to toe. The “widelow” grind features a wide sole with reduced bounce. Practice Smarter. Improve Faster COBRA CONNECT grips feature embedded sensors that work in conjunction with the Arccos Caddie mobile app - the award-winning connected golf system that helps players of all skill levels make smarter, data-driven decisions and shoot lower scores.