Sold out
Titleist GT3 Hybrid $329.99
Featuring a refined iron-like hybrid design, the GT3 Hybrid packs tremendous workability and forgiveness in a compact, player-preferred shape. With a smaller profile, refined contours, and new heel-toe CG adjustability, golfers can harness superior hybrid power, mid/high flight, and enhanced forgiveness. Workable By Design Immense performance in a controllable, iron-like design. GT3 takes on a player-preferred shaping with a smaller profile and flatter sole, sitting more flush to the ground to help play the shot you want with the distance you need. Dual Weight Optimization New adjustable heel-toe weights enable further optimization of speed, launch, and directional control to achieve incredibly fast and forgiving hybrid performance. Position the heavier weight toward your typical impact location to optimize distance dynamics for your game. Increased Inertia GT3 Hybrid features improved perimeter weighting that leads to a significant increase in high-MOI performance, especially for more compact head size—allowing golfers to go after it with greater confidence. Features: The GT3 model offers exceptional workability and forgiveness along with a mid-high ball flight. It features a smaller, more iron-like profile, yet GT3’s improved perimeter weighting boosts MOI considerably compared to the prior generation. GT3 features the same heel-toe CG adjustability as GT2, providing fitters and golfers the opportunity to optimize their weighting setup. Greater stability was unlocked through higher-MOI designs across the board. GT3 hybrids have a 15 percent increase from TSR3, despite being 6 percent smaller in size. The result is the most stable and forgiving hybrid lineup Titleist has ever created. GT2 and GT3 hybrids offer a heel-toe weighting system, with the neutral stock setup positioning the 11-gram weight in the heel and the 5-gram weight in the toe. Flipping the weights to position the heavy weight in the toe and the lighter weight in the heel allows for a more fade-biased setup and aligns the CG with an impact location slightly on the toe side of face center, where many players tend to impact the ball. Aligning the CG with a player’s typical impact location in the fitting process can optimize performance by unlocking significant ball speed gains, as well as higher launch, lower spin and straighter ball flight. Each of the three new GT hybrid models feature refinements to their shape to improve performance. Inspired by feedback from tour players, GT3’s profile has a smaller footprint than that of TSR3, and like GT2, has a flatter leading edge, which helps playability off the turf and improves performance on low-impact strikes. Specifications: Club Loft Lie Length Volume 3H 19.0° 57.0° 40.5" 108cc 4H 21.0° 57.5° 40.0" 109cc 5H 24.0° 58.0° 39.5" 106cc
Sold out
Titleist GT1 Hybrid $329.99
GT1 is our highest-launching hybrid, providing the fastest way for moderate swing speed players to experience heightened hybrid performance. Engineered for lightweight distance and forgiveness, GT1 Hybrid offers a larger face, higher launch, increased MOI, and new fore/aft CG adjustability. Ultra-Lightweight Configuration With the lightest construction of the GT lineup, GT1 Hybrid provides the highest launch and easier distance for players with moderate swing speeds. Available in a standard build or with ultra-lightweight shafts and grips to find your optimal fit. Dual Performance Control Settings New adjustable fore/aft weights enable further optimization of ball speed, launch, and spin to achieve effortless hybrid performance with the twist of a wrench. Set the heavier weight back to increase stability and launch, or set it forward for faster ball speed and lower spin. Next-Level Forgiveness With GT1 Hybrid, stability and consistency come easy. Enhanced perimeter weighting and a deeper CG substantially improve high-MOI performance, giving GT1 ultra-high levels of inertia. Combined with a slightly wider face for more confident shotmaking. Features Ultra-Lightweight Construction High Launch and Exceptional Forgiveness Adjustable Fore-Aft Spin Control Clean, Confidence-Inspiring Shape Enhanced Sound and Feel
Sold out
Titleist GT1 Fairway $399.99
Featuring an ultra-lightweight build, including a lightweight shaft and grip, the GT1 Fairway is engineered to promote faster club head speed and improved launch conditions for the moderate swing speed player. GT Fairway Woods are highlighted by Titleist's all-new Thermoform Crown, a generational technology capable of unlocking unprecedented design possibilities. Created from a new proprietary matrix polymer, a substance never used before in the golf industry, this revolutionary material saves a significant amount of weight compared to stainless steel while maintaining signature Titleist sound and feel. In the GT1, Titleist reallocate the weight to produce the deepest CG in the GT lineup, resulting in maximized inertia, improved stability, and a higher, effortless launch. GT also marks the introduction of an L-Cup face to the Titleist Fairway family. By wrapping around the bottom of the club, the new insert preserves ball speed and maintains launch conditions on shots struck low on the face, the most common miss with a fairway. Features: Engineered with a lightweight construction and components to maximize club head speed, launch, and distance for slow-to-moderate swing speed players Shallower face profile for a high launch and better playability off the turf Dual Performance Control Settings with new adjustable weights (heavier weight in the back produces more MOI and the highest launch, heavier weight forward lowers spin and increases speed) Ultra-lightweight Seamless Thermoform Crown allows for key performance gains while maintaining outstanding sound and feel Deepest CG in the GT family maximizes inertia for outstanding stability and increases launch Forged L-Cup Face wraps around the bottom of the club to bolster performance on low-center impacts Redesigned internal hosel achieves subtle mass improvements to extract every ounce of performance and provide real swing benefits SureFit adjustable hosel allows for loft and lie adjustments (+1.5°/-.75°) Stock Shafts: Fujikura Air Speeder '25, Project X Denali Red, Mitsubishi TENSEI 1K Blue Stock Grip: Golf Pride Tour Velvet 360 Lite Headcover Included
Sold out
Titleist GT1 Driver $649.99
Featuring an ultra-lightweight build, including a lightweight shaft and grip, the GT1 Driver is engineered to promote faster club head speed and improved launch conditions for the moderate swing speed player. Titleist's relentless pursuit of speed, known as the Titleist Speed Project, reaches new heights in the GT family, a byproduct of the new Thermoform Crown. Crafted from a new proprietary matrix polymer, a substance never used before in the golf industry, this revolutionary material unlocks unprecedented design possibilities while maintaining Titleist's signature sound and feel. Specifically, the crown creates discretionary weight that, in the GT1, is strategically re-positioned to generate the deepest center of gravity in the GT driver lineup. As a result, the GT1 delivers an exceptionally high launch and optimized speed, spin, and stability. The next piece of Titleist's speed formula lies in the incredibly fast face. An upgraded titanium Speed Ring stabilizes the perimeter of the face, allowing the center to produce the maximum ball speed permitted under USGA regulations, while variable face thickness ensures minimal dropoff on mishits. Finally, the GT1's new construction and weight distribution enable a more aerodynamic shape. With its shallower face depth, this design reduces drag, moving swiftly through the air to elevate club head speed. Titleist GT1 Driver Features: Profile: Effortless distance and an easy launch Engineered with a lightweight construction and components to maximize club head speed, launch, and distance for slow-to-moderate swing speed players Ultra-lightweight Seamless Thermoform Crown allows for key performance gains while maintaining outstanding sound and feel Split Mass Construction with mass shifted to the back of the club to create the deepest CG in the GT family for increased launch and optimized speed, stability, forgiveness, and spin Speed Ring VFT Face features an upgraded titanium ring that produces maximum allowable center speed and a variable thickness design to preserve ball speed on mis-hits Aerodynamic shaping with a refined crown and sole shape and a shallower face depth to promote faster club head speeds High-performance shaft options from Tour-trusted manufacturers Stock Shafts: Fujikura Air Speeder '25, Project X Denali Red, Mitsubishi TENSEI 1K Blue Stock Grip: Golf Pride Tour Velvet 360 Lite Headcover Included
Odyssey Ai-One Silv... $299.99
Callaway's groundbreaking artificial intelligence designs have revolutionized the golf industry. For the first time, this innovative approach to club development has been applied to putters, culminating in Odyssey's new Ai-ONE family. Specifically, A.I. was instrumental in engineering the unique contours backing the White Hot insert, producing a face that delivers exceptionally consistent speeds, regardless of where the ball is contacted. Mis-hits now travel the same distance as their well-struck counterparts, leading to more makes. Odyssey's research also shows that longer putts wind up 21% closer to the hole, and what golfer wouldn't trade a knee-knocker for a gimmie? Simply put, more makes + less three putts = lower scores. The Seven S features a high MOI, stable winged back design. With 41 degrees of toe hang, this putter suits players with moderate or strong arc and face rotation in their putting stroke. Features: Designed using Artificial Intelligence, the Ai-One insert delivers more consistent ball speeds, even from off-center hits, leaving putts closer to the hole Contours on the Aluminum backer of the insert is co-molded to a White Hot Urethane striking surface to promote consistent ball speed across the face Interchangeable front weights (available in 5, 10, 15, and 20 grams) allow you to dial in your head weight to your exact preference (Weight kit sold separately) Panlite® window is a unique automotive polymer that showcases the unique topology of the back of the Ai-One insert Lightweight steel shaft with counterbalanced weight to appeal to more golfers Beautiful blasted silver finish is classic and premium Head Type: Mallet Stock shaft: SL 90 Stroke Lab Steel Stock grip: Ai-ONE Pistol
Odyssey Ai-One Silv... $299.99
Callaway's groundbreaking artificial intelligence designs have revolutionized the golf industry. For the first time, this innovative approach to club development has been applied to putters, culminating in Odyssey's new Ai-ONE family. Specifically, A.I. was instrumental in engineering the unique contours backing the White Hot insert, producing a face that delivers exceptionally consistent speeds, regardless of where the ball is contacted. Mis-hits now travel the same distance as their well-struck counterparts, leading to more makes. Odyssey's research shows that longer putts wind up 21% closer to the hole, and what golfer wouldn't trade a knee-knocker for a gimmie? Simply put, more makes + less three putts = lower scores. The Seven DB features a high MOI, stable winged back design. With zero degrees of toe hang, the double bend variant suits players with a straight-back, straight-through stroke. Features: A.I. designed contours on the aluminum backer co-molded to the White Hot Urethane insert promote consistent ball speed across the face Classic White Hot soft feel beloved by players of all skill levels Panlite automotive grade polymer Ai window showcases the unique topology of the back of the insert Lightweight steel Stroke Lab 90 shaft with 20-30 grams of counterbalance weight in the butt end for a more consistent, repeatable putting stroke Finish: Premium Silver Loft: 3­° Lie: 70° Toe Hang: 0° (Face-Balanced) Head Weight: 360g Hosel: Double Bend Offset: 3/4 Shaft Stock Shaft: Odyssey Ai-ONE SL90 Steel Stock Grip: Odyssey Ai-ONE Pistol (Standard)
Odyssey Al-One Jail... $299.99
These Odyssey Ai-One putters feature our Ai-One insert which delivers more consistent ball speeds, even from off-center hits, leaving putts closer to the hole. Ai-One Insert Designed using Artificial Intelligence, we’ve created contours on the Aluminum backer of the insert which we co-mold to a White Hot Urethane striking surface to promote consistent ball speed across the face with the classic White Hot feel that Tour players and amateurs love. Ai Window Our designers and engineers developed a Panlite window, which is a unique automotive grade polymer, that allows us to showcase unique topology of the back of our insert. SL 90 Shaft A lightweight steel shaft with 20-30 grams (depending on the grip) of counterbalance weight in the butt end. This is an evolution of our Stroke Lab Weighting that will appeal to even more golfers. New Beautiful Blasted Silver Finish Option We have taken our most popular models of Ai-ONE and are making them available in a beautiful new silver finish that is classic and premium. New Jailbird Options We have taken our most popular shape and added an S neck option and switched things up with Versa 90 versions in DB and CH.
Cleveland RTZ Tour ... $189.99
The RTZ Wedges are crafted from Z-Alloy, an entirely new carbon-steel formula Cleveland created to meet the lofty expectations of the company's elite Tour wedges. This lighter, softer, and remarkably durable material, which was only developed after finding every available metal inadequate, allowed for a design completely devoid of compromise. As a result, the RTZ is Cleveland's best-performing Tour wedge to date, delivering superior feel, consistency, and forgiveness. The RTZ is remarkably stable for a blade-style, tour-caliber wedge, a byproduct of Cleveland's ZipCore technology. By replacing heavier material in the heel and hosel area with a lightweight, low-density substance, this proprietary core technology shifts the CG towards the center of the face and yields discretionary weight that's redistributed in the head's perimeter. Essentially, ZipCore infuses the MOI benefits of a larger perimeter-weighted offering into a player-preferred tour-size profile and corrects the heel-biased sweet spot traditionally found in wedges. While all tour-level wedges generate virtually the same amount of spin in pristine conditions, the numbers inherently decline when foreign substances prevent a clean strike. Cleveland's unique system of face blasts, laser-milled lines, and sharper, deeper grooves dramatically improve spin retention in wet weather and from the rough and bunker, ensuring the utmost control from any lie. Four grinds are available in the RTZ, including the new ADAPT. Available in mid to higher lofts, the ADAPT features a tour-preferred raised and flattened leading edge, full-face grooves, and an extended toe area. These attributes reduce digging and broaden the striking area, lending themselves to greenside creativity and open-faced short-game shots. Cleveland finishes the RTZ with True Temper's Dynamic Gold Tour Issue shaft and Golf Pride's Tour Velvet 360 grip. Features: Tour Rack Raw finish reduces glare, improves spin, and is rust-resistant (will rust over time) New Z-Alloy steel provides superior feel, better forgiveness, and more consistency Low-density ZipCore technology replaces heavier material in the heel and hosel with a lightweight, vibration-dampening material that shifts CG to the center of the face and boosts MOI HydraZip technology comprises a system of face blasts and laser-milled lines in the face to maximize spin in wet conditions UltiZip sharper grooves cut through grass and debris at contact, while deeper grooves create space for grass, sand, dirt, and water for more consistent spin in all conditions Adapt grind's high-toe shape and full-face grooves provide exceptional versatility 4 Available Grinds: Low, Mid, Full, and Adapt (explained in detail in the table below) Stock Shaft: True Temper Dynamic Gold Tour Issue S400 Stock Grip: Golf Pride Tour Velvet 360 Raw Finish Will Rust Over Time Specifications: LOFT GRIND BOUNCE HAND LIE LENGTH SWING WEIGHT 46° MID 10° RH 64° 35.625" D3 48° MID 10° RH 64° 35.625" D3 50° MID 10° RH 64° 35.375" D4 52° MID 10° RH 64° 35.375" D4 54° LOW+ 8° RH 64° 35.125" D5 54° MID 10° RH 64° 35.125" D5 54° FULL 12° RH 64° 35.125" D5 56° LOW+ 8° RH 64° 35.125" D5 56° MID 10° RH 64° 35.125" D5 56° FULL 12° RH 64° 35.125" D5 58° LOW 6° RH 64° 34.875" D5 58° MID 10° RH 64° 34.875" D5 58° FULL 12° RH 64° 34.875" D5 60° LOW 6° RH 64° 34.875" D5 60° MID 10° RH 64° 34.875" D5 60° FULL 12° RH 64° 34.875" D5
Cleveland RTZ Black... $169.99
All-new RTZ Wedges are made with Z-Alloy, a completely new steel formula that enables a zero-compromise design approach for incredible feel, better durability, and more consistency for Cleveland's best performing tour Wedges yet. Z-Alloy Z-Alloy is a brand-new steel with better feel. It’s softer, lighter, and remarkably durable. It gives RTZ Wedges superior feel, better forgiveness, and more consistency. On RTZ Tour Rack Wedges, Z-Alloy’s rust-resistant properties ensure longer-lasting, like-new performance. HydraZip HydraZip is a unique system of face blasts and laser-milled lines formulated to maximize spin performance under wet conditions. This technology is dynamically configured by loft groupings, which helps balance spin across lofts, while maximizing spin in adverse conditions. ZipCore This low-density core technology replaces heavier material in the heel and hosel area with a lightweight, low-density, vibration-dampening material. This proprietary core allows Cleveland to shift the Center of Gravity closer to where you strike the ball, while simultaneously adding MOI. UltiZip UltiZip’s sharper grooves cut through grass and debris at contact, while deeper grooves help make space for grass, sand, dirt, or water to clear the impact zone, giving RTZ Wedges stronger, more consistent spin from the fairway, rough, or bunker. Brand : Cleveland Country of Origin : Imported Highlights Z-Alloy Steel HydraZip Millings ZipCore Low-Density Core UltiZip Groove Cuts Specifications: LOFT GRIND BOUNCE GROOVES HAND LIE LENGTH† SW 48° MID 10° Traditional RH 64° 36" D3 50° MID 10° Traditional RH/LH 64° 35.75" D4 52° MID 10° Traditional RH/LH 64° 35.75" D4 54° MID 10° Traditional RH/LH 64° 35.5" D5 54° FULL 12° Traditional RH 64° 35.5" D5 56° ADAPT 8° Full-Face RH 64° 35.5" D5 56° MID 10° Traditional RH/LH 64° 35.5" D5 56° FULL 12° Traditional RH 64° 35.5" D5 58° LOW 6° Traditional RH 64° 35.25" D5 58° ADAPT 8° Full-Face RH 64° 35.25" D5 58° MID 10° Traditional RH/LH 64° 35.25" D5 60° LOW 6° Traditional RH 64° 35.25" D5 60° ADAPT 8° Full-Face RH 64° 35.25" D5 60° MID 10° Traditional RH/LH 64° 35.25" D5
Cleveland RTZ Tour ... $169.99
All-new RTZ Wedges are made with Z-Alloy, a completely new steel formula that enables a zero-compromise design approach for incredible feel, better durability, and more consistency for Cleveland's best performing tour Wedges yet. Z-Alloy Z-Alloy is a brand-new steel with better feel. It’s softer, lighter, and remarkably durable. It gives RTZ Wedges superior feel, better forgiveness, and more consistency. On RTZ Tour Rack Wedges, Z-Alloy’s rust-resistant properties ensure longer-lasting, like-new performance. HydraZip HydraZip is a unique system of face blasts and laser-milled lines formulated to maximize spin performance under wet conditions. This technology is dynamically configured by loft groupings, which helps balance spin across lofts, while maximizing spin in adverse conditions. ZipCore This low-density core technology replaces heavier material in the heel and hosel area with a lightweight, low-density, vibration-dampening material. This proprietary core allows Cleveland to shift the Center of Gravity closer to where you strike the ball, while simultaneously adding MOI. UltiZip UltiZip’s sharper grooves cut through grass and debris at contact, while deeper grooves help make space for grass, sand, dirt, or water to clear the impact zone, giving RTZ Wedges stronger, more consistent spin from the fairway, rough, or bunker. Brand : Cleveland Country of Origin : Imported Highlights Z-Alloy Steel HydraZip Millings ZipCore Low-Density Core UltiZip Groove Cuts Specifications: LOFT GRIND BOUNCE GROOVES HAND LIE LENGTH† SW 46° MID 10° Traditional RH 64° 36" D3 48° MID 10° Traditional RH/LH 64° 36" D3 50° MID 10° Traditional RH/LH 64° 35.75" D4 52° MID 10° Traditional RH/LH 64° 35.75" D4 54° ADAPT 8° Full-Face RH 64° 35.5" D5 54° MID 10° Traditional RH/LH 64° 35.5" D5 54° FULL 12° Traditional RH/LH 64° 35.5" D5 56° ADAPT 8° Full-Face RH/LH 64° 35.5" D5 56° MID 10° Traditional RH/LH 64° 35.5" D5 56° FULL 12° Traditional RH/LH 64° 35.5" D5 58° LOW 6° Traditional RH/LH 64° 35.25" D5 58° ADAPT 8° Full-Face RH 64° 35.25" D5 58° MID 10° Traditional RH/LH 64° 35.25" D5 58° FULL 12° Traditional RH 64° 35.25" D5 60° LOW 6° Traditional RH/LH 64° 35.25" D5 60° ADAPT 8° Full-Face RH/LH 64° 35.25" D5 60° MID 10° Traditional RH/LH 64° 35.25" D5 60° FULL 12° Traditional RH 64° 35.25" D5 62° LOW 6° Traditional RH 64° 35.25" D5 64° ADAPT 8° Full-Face RH 64° 35.25" D5
Srixon ZXi7 Iron Set $1,299.99
FEEL. CONTROL. WORKABILITYA players Iron with compact shaping and tour-preferred looks, made with all-new i-FORGED technology for the most supreme feeling Srixon Iron ever created. A single-piece forging delivers a sleek, highly-workable package. Proprietary Condensed Forging inserts added strength in the hosel area, which allows for the use of new, softer S15C steel in the single-piece Iron body for unprecedented feel and control. Added tungsten weighting perfects CG placement for ideal performance. This generation of PureFrame uses a larger forged ridge in the body of the Iron just behind the sweet spot. We've expanded this ridge for even better feel, stability, and control. Prized by tour pros, Tour V.T. Sole's unique combination of leading-edge bounce plus trailing-edge relief means that, no matter how steep your downswing, you'll glide through turf to compress the ball with full power. The 3i-7i feature wider grooves, while the 8i-AW have deeper, closer-set grooves, to ensure consistent spin across the set. Laser milling between each groove, on every loft, adds bite on every strike. A thin topline, narrow sole, short blade, and minimal offset-the preferred look for tour-level and low-handicap golfers. These compact players Irons feature a muscle-back cavity for maximum workability and a razor-sharp look.
Srixon ZXi5 Iron Set $1,299.99
All-new ZXi5 Irons represent our most potent blend of power, playability, and ultra-sharp looks. Our revolutionary i-FORGED process, combined with the latest Srixon ball speed and distance technologies, gives ZXi5 Irons unprecedented feel, speed, and power on every shot. i-Forged Condense forging stretching from the high-toe area and along the topline of the iron blade enhances overall strength, durability, and feel. Then, the forged faces on ZXi5 are softed to improve this already exceptional feel. Added tungsten weighting perfects CG placement for ideal performance. Mainframe MainFrame saves additional weight and adds more MOI through an enhanced network of milled channels on the backside of the iron face. At impact, this system amplifies ball speed and adds forgiveness. Tour V.T. Sole  Our Tour V.T. Sole's proprietary combination of sole widths, bounce angles, and notches ensures a smooth glide through fairway, rough, and sand without any loss of speed. Progressive Grooves The 3i-7i feature wider grooves, while the 8i-AW have deeper, closer-set grooves, to ensure consistent spin across the set. Laser milling between each groove, on every loft, enhances adds bite on every strike. Players Distance Shape ZXi5 features a slightly wider sole with moderate blade length and offset, giving attuned golfers enhanced distance, forgiveness, and workability-all with an ultra-clean look at address. Specifications: STEEL SWING WEIGHT GRAPHITE SWING WEIGHT HEAD LOFT HAND LIE OFFSET LENGTH† S FLEX R FLEX R FLEX A FLEX 3* 20° RH/LH 60° 4.2mm 39.25" D3 D2 C9 C8 4 22° RH/LH 60.5° 4.0mm 38.75" D3 D2 C9 C8 5 24° RH/LH 61° 3.8mm 38.25" D3 D2 C9 C8 6 27° RH/LH 61.5° 3.6mm 37.75" D3 D2 C9 C8 7 31° RH/LH 62° 3.2mm 37.25" D3 D2 C9 C8 8 35° RH/LH 62.5° 3.0mm 36.75" D3 D2 C9 C8 9 39° RH/LH 63° 2.7mm 36.25" D3 D2 C9 C8 PW 44° RH/LH 63.5° 2.2mm 35.75" D3 D2 C9 C8 AW 50° RH/LH 63.5° 1.9mm 35.75" D4 D3 D0 C9
Srixon ZXi Fairway ... $329.99
The all-new lineup of Srixon ZXi Fairway Woods boasts the tour-caliber ball speed and long-game performance necessary to top the leaderboard, while their refined shape and new adjustability options guarantee they’ll be the talk of the clubhouse. i-Flex Face This completely redesigned face thickness pattern produces more efficient energy transfer at impact, increasing ball speed. Rebound Frame Rebound frame is an entirely unique system that amplifies energy transfer at impact. By utilizing two flex zones, instead of just one, Rebound Frame maximizes flex across the face to increase power, ball speed, and ultimately, shot distance. Adjustable Hosel An all-new, 1.5° hosel sleeve lets you fine-tune every Zxi Fairway Wood's loft, lie, and face angle. Carbon Crown and Crown Step The 3-Wood and 3+- Wood use a strong but lightweight carbon crown, positioning mass low and maximizing COR. Their stepped crown design lowers the clubheads' center of gravity, ultimately raising launch trajectory for higher, longer shots. However, the 5-Wood and 7-Wood do not include a stepped crown, prioritizing improved spin and accuracy numbers rather than distance. Refined Tour Shaping Progressive new footprints for ZXi fairway woods features a flatter leading edge and more grounded toe, along with an improved sole shape for increased forgiveness.  Specifications: HEAD LOFT HAND LIE VOLUME LENGTH† SWING WEIGHT CLUB WEIGHT 3+ 13.5° RH 58° 187cc 43.25" D3 (S, X) 329g (X), 328g (S) 3 15° RH/LH 58° 187cc 43.25" D3 (R, S, X) 329g (X), 328g (S, R) 5 18° RH/LH 58.5° 155cc 42.75" D2 (A), D3 (R, S, X) 333g (X), 332g (S, R), 326g (A) 7 21° RH 59° 142cc 42.25" D2 (A), D3 (R, S, X) 335g (X), 336g (S, R), 329g (A)
Srixon ZXi4 Iron Set from $1,199.99
FEEL. FORGIVENESS. CONSISTENCY.With a clean look at address, forged feel, and hollow head design, ZXi4 delivers the heightened forgiveness you need in a compact shape you’ll want to play. i-Forged Construction ZXi 4 Irons feature a softer SUS17-47 material, which delivers dramatically better feel than previous generations of ZX4 Irons. This softer material allows us to adjust loft and lie more easily to ensure the perfect fit. Mainframe MainFrame saves additional weight and adds more MOI through an enhanced network of milled channels on the back side of the Iron Face. At impact, this system amplifies ball speed and adds forgiveness. Tour V.T. Sole Our Tour V.T. Sole's proprietary combination of sole widths, bounce angles, and notches ensures a smooth glide through fairway, rought, and sand without any loss of speed. Progressive Grooves  The 4i-7i feature wider grooves, while the 8i-SW have deeper, closer set grooves, to ensure consistent spin across the set. Laster milling between each groove, on every loft, enhances adds bite on every strikes.  Players-Inspired Shape ZXi4's unique hollow design features moderate sole width, our longest blade length, and our highest offset for max forgiveness, all while still offering an appealing look at address.  Specifications: STEEL SWING WEIGHT GRAPHITE SWING WEIGHT HEAD LOFT HAND LIE OFFSET LENGTH† S FLEX R FLEX R FLEX A FLEX 4 21° RH/LH 60.5° 4.1mm 38.75" D2 D2 C9 C8 5 23° RH/LH 61° 3.9mm 38.25" D2 D2 C9 C8 6 25.5° RH/LH 61.5° 3.6mm 37.75" D2 D2 C9 C8 7 28.5° RH/LH 62° 3.2mm 37.25" D2 D2 C9 C8 8 33° RH/LH 62.5° 3.0mm 36.75" D2 D2 C9 C8 9 38° RH/LH 63° 2.7mm 36.25" D2 D2 C9 C8 PW 43° RH/LH 63.5° 2.2mm 35.75" D2 D2 C9 C8 AW 49° RH/LH 63.5° 1.8mm 35.75" D3 D3 D0 C9 SW 56° RH 63.5° 1.0mm 35.75" D3 D3 D0 C9
Srixon ZXi Max Driver $549.99
FORGIVENESSSrixon’s highest MOI Driver in the lineup, the ZXi MAX offers an easy swing feel and heightened forgiveness in a sharp, high-performance profile. A single adjustable weight placed low in the rear allows you to choose your preferred swing weight and maximize ZXi MAX’s high MOI benefits for total confidence on the tee box. DISTANCE AND LOW SPINThe ZXi LS Driver’s advanced low spin profile is a perfect match for players with aggressive swings who want to dominate the distance game. Two adjustable sole weights placed in the front and rear allow you to dial in your preferred spin characteristics for a lower ball flight and extra yards after carry. i-Flex Face This completely redesigned face thickness pattern produces a more efficient energy transfer at impact. The added strength of the interior I-FLEX face structure allows the center of the face to be thinner than last gen, increasing ball speed. Star Frame Crown Complete latticework creates the structural integrity necessary to support a ultralight, remarkably thin titanium crown, ultimately allowing discretionary mass to be set where it best suits each ZXi Driver's idea launch and spin characteristics.  Rebound Frame Rebound frame is an entirely unique system that amplifies energy transfer at impact. By utilizing two flex zones, instead of just one, Rebound Frame maximizes flex across the face to increase power, ball speed, and ultimately, shot distance. Laser Face Milling Brand new for ZXi Drivers, visible laser face milling has been added to the surface to help stabilize spin and add forgiveness in wet conditions.  Adjustability Two adjustable sole weights placed in the front and rear allow you to dial in your preferred spin characteristics. And an all-new, 1.5° hosel sleeve lets you fine tune Driver loft, lie, and face angle.' Specifications:
Srixon ZXi LS Driver $549.99
DISTANCE AND LOW SPINThe ZXi LS Driver’s advanced low spin profile is a perfect match for players with aggressive swings who want to dominate the distance game. Two adjustable sole weights placed in the front and rear allow you to dial in your preferred spin characteristics for a lower ball flight and extra yards after carry. i-Flex Face This completely redesigned face thickness pattern produces a more efficient energy transfer at impact. The added strength of the interior I-FLEX face structure allows the center of the face to be thinner than last gen, increasing ball speed. Star Frame Crown Complete latticework creates the structural integrity necessary to support a ultralight, remarkably thin titanium crown, ultimately allowing discretionary mass to be set where it best suits each ZXi Driver's idea launch and spin characteristics.  Rebound Frame Rebound frame is an entirely unique system that amplifies energy transfer at impact. By utilizing two flex zones, instead of just one, Rebound Frame maximizes flex across the face to increase power, ball speed, and ultimately, shot distance. Laser Face Milling Brand new for ZXi Drivers, visible laser face milling has been added to the surface to help stabilize spin and add forgiveness in wet conditions.  Adjustability Two adjustable sole weights placed in the front and rear allow you to dial in your preferred spin characteristics. And an all-new, 1.5° hosel sleeve lets you fine tune Driver loft, lie, and face angle.' Specifications: LOFT HAND LIE VOLUME LENGTH† SWING WEIGHT CLUB WEIGHT 8.0° RH 59° 460cc 45.75" D3.5 (S), D4.5 (X) 326g (X), 317g (S, R) 9.0° RH 59° 460cc 45.75" D3.5 (S), D4.5 (X) 10.5° RH 59° 460cc 45.75" D3.5 (R, S)
Srixon ZXi Driver $549.99
ALL-AROUND PERFORMANCEThe ZXi Driver combines blistering ball speed with exceptional MOI for a club that provides a player with superb drives and forgiveness while keeping spin relatively low. Two adjustable sole weights allow you to calibrate a preferred ball flight path with your personal swing characteristics. i-Flex Face This completely designed face thickness pattern produced more efficient energy transfer at impact. The added strength of the interior i-Flex face structure allows the center of the face to be thinner than last gen, increasing ball speed. Star Frame Crown Complete lattice work creates the structural integrity necessary to support an ultralight, remarkably thin titanium crown, ultimately allowing discretionary mass to be set where it best suits each ZXi Driver's ideal launch and spin characteristics.   Rebound Frame Rebound Frame is an entirely unique system that amplifies energy transfer at impact. By utilizing two flex zones, instead of just on, Rebound Frame maximizes flex across the face to increase power, ball speed, and, ultimately, shot distance. Laser Face Milling Brand new for ZXi drivers, visible Laser Face Milling has been added to the surface to help stabilize spin and add forgiveness in wet conditions. Adjustability  Two adjustable sole weights placed in the heel and toe allow you to adjust the swing weight and Center of Gravity to favor a draw or fade shop shape. And an all-new, 1.5° degree hosel sleeve lets you fine tune Driver loft, lie, and face angle. Specification: LOFT HAND LIE VOLUME LENGTH† SWING WEIGHT CLUB WEIGHT 9.0° RH 59° 460cc 45.75" D3 316g (X), 315g (S,R) 10.5° RH 59° 460cc 45.75° D3 316g (X) 315g (S,R)
Cleveland HB Soft 2... $199.99
HB SOFT 2 Black takes Cleveland's Speed Optimized Face Technology to all-new levels of true swing feel by syncing every head shape with balanced, stroke specific components. So all you need to do is choose the right stroke type and head shape for you, and Cleveland will set up everything else to spec to get consistent distance performance in a finely tuned, near-custom Putter for an optimal price. UST MAMIYA ALL-IN SHAFT UST Mamiya ALL-IN shafts feature advanced stability and the feel of a multi-material shaft. Their optimally balanced designs use high-tensile carbon fiber and proprietary nanoalloys to add stiffness, strength, and consistency SPEED OPTIMIZED FACE TECHNOLOGY A dynamic groove milling pattern on the face of every HB SOFT 2 Black Putter, SOFT normalizes ball speed across an enlarged striking area—ensuring more consistent, predictable distance performance STROKE SPECIFIC DESIGNS HB SOFT 2 Black features nine all-new Putters carefully assembled for straight or slight arc stroke types, each synced with its complementing hosel style, toe hang, alignment system, and grip. CONSISTENT SWING FEEL To ensure each HB SOFT 2 Black Putter has a consistent swing feel—model to model—no matter which shaft length you choose, a 20g weight is included within the butt end of the shaft on all models 35” and over
Cleveland HB Soft 2... $199.99
HB SOFT 2 Black takes our Speed Optimized Face Technology to all-new levels of true swing feel by syncing every head shape with balanced, stroke specific components. So all you need to do is choose the right stroke type and head shape for you, and we’ll set up everything else to spec to get consistent distance performance in a finely tuned, near-custom Putter for an optimal price. UST MAMIYA ALL-IN SHAFT UST Mamiya ALL-IN shafts feature advanced stability and the feel of a multi-material shaft. Their optimally balanced designs use high-tensile carbon fiber and proprietary nanoalloys to add stiffness, strength, and consistency. SPEED OPTIMIZED FACE TECHNOLOGY A dynamic groove milling pattern on the face of every HB SOFT 2 Black Putter, SOFT normalizes ball speed across an enlarged striking area—ensuring more consistent, predictable distance performance. STROKE SPECIFIC DESIGNS HB SOFT 2 Black features nine all-new Putters carefully assembled for straight or slight arc stroke types, each synced with its complementing hosel style, toe hang, alignment system, and grip. CONSISTENT SWING FEEL To ensure each HB SOFT 2 Black Putter has a consistent swing feel—model to model—no matter which shaft length you choose, a 20g weight is included within the butt end of the shaft on all models 35” and over.
Cleveland HB Soft 2... $199.99
HB SOFT 2 Black takes Cleveland's Speed Optimized Face Technology to all-new levels of true swing feel by syncing every head shape with balanced, stroke specific components. So all you need to do is choose the right stroke type and head shape for you, and Cleveland will set up everything else to spec to get consistent distance performance in a finely tuned, near-custom Putter for an optimal price. UST MAMIYA ALL-IN SHAFT UST Mamiya ALL-IN shafts feature advanced stability and the feel of a multi-material shaft. Their optimally balanced designs use high-tensile carbon fiber and proprietary nanoalloys to add stiffness, strength, and consistency SPEED OPTIMIZED FACE TECHNOLOGY A dynamic groove milling pattern on the face of every HB SOFT 2 Black Putter, SOFT normalizes ball speed across an enlarged striking area—ensuring more consistent, predictable distance performance STROKE SPECIFIC DESIGNS HB SOFT 2 Black features nine all-new Putters carefully assembled for straight or slight arc stroke types, each synced with its complementing hosel style, toe hang, alignment system, and grip. Specifications: Model Hosel Loft Lie Toe Hang Stroke Type Headweight Alignment 11S Slant 3.0° 70.0° Moderate Slight Arc 365g 1 Line

Free In-Store Pickup

Free Shipping

on orders over $99

Easy Returns